Product

For Specifications, please see catalogues

Safe Area AC Motors

W Aluminium (Not Available in Australia & New Zealand)
Construction: Aluminium
Frame sizes: 63 to 180

Output: 0.07kW to 22kWThe W aluminium range covers products with outputs from as little as 0.07kW to 22kW in frame sizes WU-DA63S to WU-DA180L, in either 2,4,6 or 8 pole speeds.They are widely used in a diverse range of applications from food and drink to water and sewage. From heating and ventilation to refrigeration.

Some of the benefits of aluminium over cast iron include high resistance to corrosion and atmospheric attack (except chlorine, salt-laden or sulphuric acid) and the fact that aluminium is approximately one third the weight of cast iron.

W Cast Iron (Not Available in Australia & New Zealand)
Construction: Cast Iron
Frame sizes: 80 to 355
Output: 0.75kW to 400kWThe W cast iron motor range covers products with outputs from as little as 0.75kW to 400kW in frame sizes 80 to 355L.

They are suitable for use within a diverse range of applications from food and drink to china clay production. From roller table drives to refrigeration.

Many applications often have adverse operating conditions including repeated starting and occasional overloading; the W cast iron range is well suited to these situations.
A virtual go anywhere motor, this cast iron range has a full 3-year guarantee.

Brake Motors (Not Available in Australia & New Zealand)
Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kWBrook Crompton offers the most comprehensive range of brake motors with highly competitive delivery times, due in part to its innovative brake kit concept available on W motors.

Single Phase (Not Available in Australia & New Zealand)
Construction: Aluminium
Frame sizes:
71 to 90 (Capacitor Start / Induction Run)
71 to 100L (Capacitor Start / Capacitor Run)
63 to 90L (Permanent Capacitor)
Outputs:
0.12kW to 1.5kW (Capacitor Start / Induction Run)
0.18kW to 3.0kW (Capacitor Start / Capacitor Run)
0.09kW to 2.2kW (Permanent Capacitor)Single phase motors are used primarily in small workshops and farms with a domestic supply. Some industrial equipment are specifically for use with a single phase electricity supply, such as fans, blowers, centrifugal pumps and high pressure washers.

Dependent on the application we are able to offer different types of single phase motors

EEx nA (Not Available in Australia & New Zealand)
Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kWThe W EEx nA non-sparking range of motors covers products with outputs from 0.18kW to 400kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds (also available in aluminum from 71 to 180 frames).

All relevant products fully comply with the requirements of ATEX.

Dust Ignition Proof (Not Available in Australia & New Zealand)
Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kWThe dust ignition proof range of W motors covers products with outputs from as 0.18kW to 315kW in cast iron frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds. All relevant products fully comply with the requirements of ATEX.

EEx e (Not Available in Australia & New Zealand)
Construction: Aluminium or Cast Iron
Frame sizes: 63 to 355
Output: 0.07kW to 400kWThe W EEx e increased safety range of motors covers products with outputs from 0.18kW to 315kW in frame sizes W-DF80M to W-DF355L, in either 2,4,6 or 8 pole speeds. ATEX approved by Baseefa.

S30 Aluminium (Only available in Australia and New Zealand)

Construction: Aluminium

Frame sizes: 80 to 160

Output: 0.55kw to 15kw

High efficiency IE3 high specification aluminium industrial motors standard with IP66 ingress protection
and Class H Insulation. 132 frame and above fitted with PTC protection and SPM vibration studs.
Multi-Voltage/ Multi- Frequency design allowing versatility across numerous applications.
Top mounted terminal box for ease of termination.

S30 Aluminium Brake Motor (Only available in Australia and New Zealand)

Construction: Aluminium

Frame sizes: 80 to 160

Output: 0.55kw to 15kw

High efficiency IE3 high specification aluminium industrial brake motors standard with IP66 ingress protection
and Class H Insulation. 132 frame and above fitted with PTC protection and SPM vibration studs.
Multi-Voltage/ Multi- Frequency design allowing versatility across numerous applications.
Fitted with hand-release and half wave rectifier.
Top mounted terminal box for ease of termination.

S30 Cast Iron (Only available in Australia and New Zealand)

Construction: Cast Iron

Frame sizes: 80 to 355

Output: 0.55kw to 355kw

High efficiency IE3 high specification cast iron industrial motors standard with IP66 ingress protection
and Class H Insulation. 132 frame and above fitted with PTC protection and SPM vibration studs.
Multi-Voltage/ Multi- Frequency design allowing versatility across numerous applications.
Top mounted terminal box for ease of termination.

OMK3- High Efficiency Severe Duty Mining (Only available in Australia and New Zealand)

Construction: Cast Iron

Frame sizes: 80 to 400

Output: 0.55kw to 1000kw

High efficiency IE3 high specification cast iron industrial motors standard with IP66 ingress protection
and Class H Insulation. PTC protection, Anti-condensation Heaters and SPM vibration studs fitted as standard.
VSD ready with 315 frame and above fitted with EDM protection.
Multi-Voltage/ Multi- Frequency design allowing versatility across numerous applications.
Oversized terminal box for ease of termination.