General Purpose Single Phase Rolled Steel

  • C Face with feet
  • Locked drive end bearing
  • Belt drive or close coupled applications
  • Class F insulation
  • Service factor 1.15

Farm Duty Single Phase Rolled Steel

  • C Face with feet
  • Locked drive end bearing
  • Belt drive or close coupled applications
  • Class F insulation
  • Service factor 1.15
  • High starting torque
  • Shielded bearings
  • IP54 protection

W Premium Aluminum NEMA & IEC

  • NEMA MG1-PART 31 Inverter Duty
    15:1 Constant Torque
  • Service Factor 1.25
  • IP55 degree of protection
  • VPI Impregnation
  • Internal Tropicproof
  • F1, F2, & F3 convertible
  • Class F insulation
  • Dual Rated 60/50Hz
  • Split conduit box is 90 degreee rotatable
  • Warranty: 3 Years
  • CSA approved for Class I ; Division 2; Groups A,B,C & D,T3

W Premium Cast Iron NEMA & IEC

  • NEMA MG1-PART 31 Inverter Duty
    15:1 Constant Torque
  • Severe Duty
  • Service Factor 1.25
  • IP55 degree of protection
  • VPI Impregnation
  • Internal Tropicproof
  • F1, F2, & F3 convertible
  • Class F insulation
  • Dual Rated 60/50Hz
  • Split conduit box is 90 degree rotatable
  • Warranty: 3 Years
  • CSA approved for Class I ; Division 2 ; Groups A,B,C & D,T3

Premium Efficiency Close Coupled JM/JP

  • NEMA MG1-PART 31 Inverter Duty
    15:1 Constant Torque
  • Aluminum construction up to 30HP
  • Cast iron construction from 40HP – 75HP
  • Service Factor 1.25
  • IP55 degree of protection
  • Internal Tropicproof
  • F1, F2, & F3 convertible
  • Class F insulation
  • Dual Rated 60/50Hz
  • Split conduit box is 90 degree rotatable
  • Warranty: 3 Years
  • CSA approved for Class I ; Division 2 ; Groups A,B,C & D,T3

NEMA Explosion Proof

  • UL/CSA Approved Class I Group C & D Class II Groups E,F&G T3B 140 – 250T frame
  • UL/CSA Approved Class I Group D Class II Groups E,F&G T3B 280T and above
  • NEMA MG1 Part 31 Inverter Duty
  • UL certified 5:1 constant torque
  • CSA certified 10:1 constant torque
  • Service Factor 1.15 sine wave power. 1.0 service factor VFD power
  • IP55 degree of protection
  • NEMA Design B performance
  • Class F insulation
  • Dual rated 60 / 50 Hz
  • Thermostats fitted as standard
  • Sealed Ball Bearings 140 – 280T
  • Regreasable bearings 320T and above
  • Stainless Steel Nameplate
  • F1 to F2 convertible
  • Warranty: 3 years

ATEX EExd Explosion Proof

  • Motors comply with CENELEC/EURONORM Standards EN60079 Certified by BASEEFA / ATEX
  • Zone 1, Groups IIA & IIB
  • Totally Enclosed Fan Cooled Enclosure
  • All motors suitable for T4 application
  • Cast Iron Construction
  • Class F insulation
  • Service Factor 1.0 50Hz
  • C & D Flanges available
  • F2 to F1 convertible up to 180 frame. 200 and above are F0, F2, F1 convertible
  • Warranty: 2 years

ATEX EExde Explosion Proof

  • Motors comply with CENELEC/EURONORM Standards EN60079 Certified by BASEEFA / ATEX
  • Zone 1, Groups IIA, IIB, & IIC
  • Totally Enclosed Fan Cooled Enclosure
  • All motors suitable for T4 application
  • Cast Iron Construction
  • Class F insulation
  • Service Factor 1.0 50Hz
  • C & D Flanges available
  • F2 to F1 convertible up to 180 frame. 200 and above are F0, F2, F1 convertible
  • Warranty: 2 years

ATEX EEx nA Zone 2

  • Motors comply with CENELEC/EURONORM Standards EN60079 Certified by BASEEFA / ATEX
  • Zone 2, Group II T3 non sparking
  • Totally Enclosed Fan Cooled Enclosure
  • Cast Iron Construction
  • Class F insulation
  • C & D Flanges available
  • F2 to F1, F3 convertible
  • Warranty: 2 years

Open Drip Proof

  • NEMA MG1-PART 31 Inverter Duty
    Premium Efficient
  • Cast Iron Frames
    IP22
    4:1 Constant Torque
  • Service Factor 1.15
  • Class F insulation
  • Dual Rated 60/50Hz
  • Warranty: 3 Years

HVAC Blower & Condenser Motors

  • Automatic Overload
  • Extended Thru Bolts
  • Ball Bearings
  • Reversible Rotation
  • 5.5″ Diameter
  • 36″ Leads
  • Class B insulation
  •  

Brake Motors

  • NEMA frames 56 to 215T
  • Metric frames 71 to 132L
  • Available with C or D flange

Witton Kramer Brakes

  • Magnetic shoe brakes are used for a wide variety of applications. They are simple to use and maintain, and their operation can be controlled in a variety of different ways by means of external control equipment.
  • Applications: Cranes, Conveyors, Process Lines, Hoists, Mining, Ore Unloaders, Rolling Mills, Vehicle Wash Plant, Ski Lifts, Winches, General Machinery Drives